Rating:

CISNO Tactical Green Laser Sight Scope for Gun Pistol with Picatinny Mount

$36.90 (as of October 18, 2017, 4:59 am) & FREE Shipping. Details

Note: some models do not fit as shown below DWK1787 H&KVP9 F&N40 Kimber custom rl 2 CZ52 M9 Kel Tec Pmr 30 DPMS at .15 Walther PPX 9mm Springfield

Usually ships in 24 hours

Quantity

Note:
some models do not fit as shown below
DWK1787
H&KVP9
F&N40
Kimber custom rl 2
CZ52
M9
Kel Tec Pmr 30
DPMS at .15
Walther PPX 9mm
Springfield XDS 3.3
Canik TP9
Walter P99
PPQ
Hi-Point .40 S&W

WINDAGE & ELEVATION ADJUSTMENTS
CISNO laser sights are pre-sighted at the factory to zero. Many times no further adjustments are required. The products is adjustable for windage and elevation if further adjustments are desired. A two-screw alignment system is used to adjust for it and screws are located just behind the laser cap. Refer to the figure below for sighting instructions.
DO NOT OVERTURN THE ADJUSTMENT SCREWS. A little adjustment goes a long way. Rarely is more than a half a turn is required to make your needed adjustments.

BATTERY GUIDELINES & REPLACEMENT
Our batteries provide three (3) hours of illumination under normal conditions. If the laser becomes dim or fades, simply replace the batteries. Keep battery compartment free of dirt or other contaminants. Debris inside the battery compartment may affect laser operation and performance.
CISNO laser sights use one CR2 battery

SPECIFICATIONS
LASER TYPE: Class 3R Visible Laser Diode
PEAK POWER: 5m W
WAVELENGTH: 532nm > Green Diode
BEAM SIZE: 90% of Light Contained in Approx. 0.5″ Circle at 50 Feet
BEAM DIVERGENCE: <1mrad

What is included:
1X Green Laser Sight
1X Battery
All aluminum construction – lightweight and durability; Fully adjustable settings for windage and elevation
Fits all Railed weapons weaver/picatinny; Some weapons may require an adapter like H&K and Sigma series pistols, some sig sauer pro series
Laser hazard Class: IIIa & Output Power: ≤ 5 mw
Power by 1x CR2 battery(included)
It will fit gun of which rail mount width is 21mm(0.82″) and clearance needed is 1.25″. The clearance needed is the distance from rail notch to the front of the trigger guard.

Binding

Brand

Color

EAN

EANList

ItemDimensions

Label

Manufacturer

PackageDimensions

ProductGroup

ProductTypeName

Publisher

Studio

UPC

UPCList

Related Products